Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> Used
> Mechanical
> Maiami
> Floor mounted commercial garbage disposal 10000 10 hp
Floor mounted commercial garbage disposal 10000 10 hp
LARGE THROAT OPENING AND HIGH CAPACITY GRINDING COMPONENTS
DESIGNED FOR QUICK, EFFICIENT DISPOSAL OF THE TOUGHEST LOADS
10 HP disposer, dual voltage
10" Diameter heavy duty, cast stainless steel turntable
6 Ripper bars integrated with turntable and hard face beaded edge for prolonged life
Also available with short housing (specify 10000-3S).
Models 10000-3 and 10000-3S are equipped with a drain outlet for connection to
a conventional 3" trap. The trap may be connected to a 3" branch waste line running
directly into a waste stack. We recommend a slope in the waste line of not less than 1/4" per
foot. Limit the 3" drain line to a turn free run of 15', then connect to a 4" or 6" line or stack.
10000-3 or 10000-3S 60 cycle 3 Phase 10 HP 1740 RPM 208-240/440 volts 19.4/9.7 amps
NOTE: The legs can be cut shorter if the unit must be lower than the minimum shown for the
screw adjustment. 2" clearance must be maintained beneath the motor for ventilation.
For example, on a flat floor the model 10000-3 can be shortened by 1/2".
If space between disposer and wall is insufficient to allow for installation of trap, waste line may
have to be at an angle to the wall as shown.
http://img269.imageshack.us/img269/3240/wkl10000.jpg
http://img194.imageshack.us/img194/9905/wkl10000spec1.jpg
http://img64.imageshack.us/img64/4074/wkl10000spec2.jpg
