Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> Used
> Mechanical
> Cleveland
> Heart pine beams lumber timbers moulding trim doors
Heart pine beams lumber timbers moulding trim doors
Picture 1&2 (4) 41/2 x 12 x 132inches that is 49.5 board feet per beam
They have been resawn all four sides with band saw. These pieces are spectacular in patina,straightness and quality. Very sold beam. No nails ,paint. The 4 1/2 inch edge has some bolt holes. They run about 3 inches deep
These timbers are almost knot free. A lot of vertical grain, Grain is tight
(10) Picture 3 - 5 x 8 x 84 inches +-. 23 board feet each
these timbers have not been cleaned up. They are nail free and unpainted. A lot of vertical grain. Some area growth rings ar 12-16 per inch
All these timber came from buildings that were erected in the mid 1800. They all came from trees that had to have been 150 to 300 years old.If you do the math. 1850 - 300 1550. That was before the Pilgrims arrived by 70 years
This material can be resawn into any thickness, need 1 x 6 x 84 I can make it
I can cut these , make doors,molding, lumber or heavy veneers. as addtional cost for the service- whats your project
Please contact me at ****@heartwood-millwork.com
