Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> Used
> Electronic
> St. Louis
> Delfield CAB2-650 mobile enclosed plate dispenser, two
Delfield CAB2-650 mobile enclosed plate dispenser, two
Mobile Enclosed Plate Dispenser, Two Self Elevating Stacks, 6.5" Plate Size, Unheated
Dispenser, Plate, enclosed mobile design, two self-elevating dish dispensing tubes, maximum dish size approximately 6-1/2" dia., stainless steel construction, 4" casters
* Cabinet top shall be 16-gauge stainless steel with all corners welded and polished and reinforced with heavy-gauge channels.
* Cabinet exterior panels and corner support angles shall be 20-gauge stainless steel.
* Unit shall have four 4.00" diameter polyolefin swivel casters (all locking), and non-marking gray bumpers at each corner.
* Dispenser tube shall have 3 vertical side channels and a bottom brace of 22-gauge stainless steel.
* Top supporting flange shall be 18-gauge stainless steel. Flange, channels and bottom brace shall be integrally welded together.
* Flange shall have 3 guide posts molded from high impact plastic.
* Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs on perimeter of vertical side channels.
* The dish carrier head shall be stainless steel welded rods with a removable 18-gauge stainless steel top plate.
* Capacity of tubes shall be approximately 72 dishes, with a maximum stacking height of 24.00"
