Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> Used
> Electrical
> Milaukee
> Baldor 3 hp motor w/ hydra-cell pump with rp filter & h
Baldor 3 hp motor w/ hydra-cell pump with rp filter & h
Baldor 3 HP Motor w/ Hydra-Cell Pump with RP Filter & Hoses
Hydra-Cell Pump Specifications
This Pump is a powerful positive displacement pump capable of flow rates from 1 to 8 GPM at pressures up to 1,000 PSI. These pumps were specifically designed to replace vertical multistage centrifugal pumps installed on CNC machining centers. Vertical multistage centrifugal pumps have mechanical seals that are prone to wear and costly to replace. In addition the centrifugal action can contribute to foaming of water based machine tool coolants.
Model D12XLBGHFECA
D12 = Flanged for NEMA 182/18TC, 213/215TC
X = Max. 6.2 gpm (3.5 lmp) @1150 rpm
L = Pump Head Version L
B = Brass Pump Head Material
G = Viton-XT Diaphragm & O-Ring Material
H = 17-4 PH Stainless Steel Valve Seat Material
F = 17-7 PH Stanless Steel Machined Valve Material
E = Elgiloy Valve Springs
C = Celcon Valve Spring Retainers
A = 10W30 Standard Duty oil
* Maximum Capacity: 1150 RPM, 6.2 GPM
* Maximum Delivery: 23.5 l/min - 185 rev/gal
* Max Inlet Pressure: 250 psi (17 bar)
* Max Temperature: 250 F (121 C)
* Inlet Port D-12: 1 inch NPT; G-12: 1 inch BSPT
* Discharge Port D-12: 3/4 inch NPT; G-12: 3/4 inch NPT
* Shaft Diameter 7/8 inch (22.22 mm)
* Motor Compatibility D-12: Accepts NEMA 182/184TC and 213/215TC C-Face motors (without feet).
* Shaft Rotation Bi-directional
* Bearings Tapered roller bearings
* Oil Capacity 1.5 US quarts (1.4 liters)
* Weight 64 lbs (29 kg)
Baldor Industrial Motor
* RPM 60 HZ 1140
* NEMA Frame 213TC
* MULT. SYM. L1
* C Dimension 18.63
* Volts: 208-30/460
* Amps: 10.2 9.6 /4.8
* Eff@Full Load 81.5
* Full Load Amps 4.8
* Rating: 40C Amb. Cont.
* Catalog No: VM3704T
300 psi @220 F Max AWP
* Location: Paramount, CA 90723, United States
