Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> Used
> Electrical
> Los Angeles
> New fluke 196C/003 scopemeter
New fluke 196C/003 scopemeter
Brand New, Fluke 196C/003 Scope Meter
* Dual-input 200, 100 or 60 MHz bandwidth
* Up to 2.5 GS/s real-time sampling per input
* Connect-and-View automatic triggering and a full range of manual trigger modes
* Digital Persistence for analyzing complex dynamic waveforms like on an analog scope
* Fast display update rate for seeing dynamic behavior instantaneously
* Automatic capture and replay of 100 screens
* 27,500 points per input record length using ScopeRecord mode
* TrendPlot paperless chart recorder for trend analysis up to 22 days
* Up to 1000 V independently floating isolated inputs
* Waveform reference for visual comparisons and automatic pass/fail testing of waveforms
* Vpwm function for motor drive and frequency inverter applications.
* 1000 V CAT II and 600 V CAT III safety certified
* Four hours rechargeable NiMH battery pack
Fluke 19xC: 144 mm Full Color LCD
Fluke 19xB: 144 mm Monochrome LCD
Fluke 19xC: Yes, gives analog oscilloscope like waveform decay (user selectable)
Fluke 19xB: Persistence on/off
Fluke 19xC: Visual Reference and Automatic Pass / Fail testing
Scope mode: 1200 points per input channel
ScopeRecord mode: 27,000 points per input or more (5 ms/div 2 min/div.)
2 plus external / DMM input, all isolated from each other and from ground
Fluke 19xC: 2 mV/div. 100 V/div.
Fluke 19xB: 5 mV/div. 100 V/div
Up to 3 ns using Pulse Width triggering; 50 ns peak detect at 5 ms/div. to 1 min/div
Fluke 199C, 199B, 196C, 196B: 5 ns/div to 2 min/div
Fluke 192B: 10 ns/div to 2 min/div
Connect-and-View , Free Run, Single Shot, Edge, Delay, Video Frame, Video line, Selectable pulse width and External
7 cursors measurements, 30 automatic measurements
A + B, A B, A x B, A versus B (X-Y-mode, giving Lissajous diagrams)
Start on Trigger, Stop on Trigger
Automatic, with Replay capability
5 more memories are made available upon registration of theScopeMeter
Two, each can store 100 scope screens, a ScopeRecord or a TrendPlot
5000 counts, Volts, Amps, Ohms, Continuity, Diode, Temp
1000 V CAT II / 600 V CAT III (instrument and included accessories)
Adapter / battery-charger included
Using optional Optically Isolated RS-232 adapter / cable
Rechargeable NI -MH Battery Pack Innstalled
Battery Charger Line Power Adapter
Two 1000 V Oscilloscope Probe Sets (Red & Gray)
