Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> Non functional
> Southern pride smoker sc-200-sm bbq s#4848
Southern pride smoker sc-200-sm bbq s#4848
Southern Pride smoker Model: SC-200-SM S#4848 manufactured 12-96
The gasket, casters, both laminates, chip heater and 5ft power cord ( with cord cap you/electrician will need to connect wires ) were replaced in 07 and has been used in residence since, 3 to 4 times per year. It has 5 shelves that have rust on them but no drip pan any 1/2 or full pan will work.
I have been in restaurant service business since 1983 and used all original parts from Southern Pride.
This was removed from Mexican restaurant that only smoked ribs once a day 3.5 hours not full time use.
This unit has older style of controller and a lot less electronics and controls, also the chip box will stay on as long as switch is on newer style shuts off after 4 hours.
* A Vortex Convection air system insures temperature uniformity and even cooking. This feature reduces cooking time, reduces shrinkage, retains moisture and allows cooking at a lower temperature.
* At low temperatures (approx. 150 degrees), you can hold product for hours without loss of quality.
* Total versatility - Barbecue/Smoker, Roasting, Holding Oven - all in one unit.
* High quality design and construction.
* Made in U.S.A. by skilled craftsmen who take pride in their work and build quality into Southern Pride products.
* Pork Butts (7 lb): 30 total/210 lbs total
* Pork Ribs (3.5 lb): 20 total/28 lbs total
* Beef Brisket (12 lb): 15 total/180 lbs total
* Whole Chickens (3 lb): 40 total/120 lbs total
* St. Louis Ribs (2.75 lb): 25 total/69 lbs total
* w/ Optional Rib Racks: 65 total/179 lbs total
* Turkeys, Hams, Shoulders, Prime Rib (14 lb): 12 total/144 lbs total
This is an older unit and has dents and scratches, there are dents on top from loading/unloading, right side had heat marks from cook top next to it and was covered in 07 with stainless steel and left side has rows of dents from something in its prior life, door has dents but seals properly, I took a few pics to point out these issues.
If you want something that looks new you will be disappointed, but if you want something that will work for easy BBQ you will be happy for years to come!
I can properly cover the sides with aluminum tread plate ( like truck tool box ) and no sharp edges for $150.00 and will look great!
See web site /p/pits_sc-200-sm.php for more info
