Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> Non functional
> Mechanical
> New York City
> 3 axis nema 34STEPPER motor 736OZ-in& driver cnc router
3 axis nema 34STEPPER motor 736OZ-in& driver cnc router
3 PCS Nema 34 Stepper Motor with 736oz-in holding torque,
3 PCS SD-2H086MB with 24-50VDC,8.2A peak current, 50 microstep
1 PC Power Supply for 350W,24VDC,
Holding torque: 5.2N.m 736oz-in
2, Stepper Motor Driver with 24-50VDC,8.2A peak current, 50 microstep
RTH3 50 FAN ON, 45 FAN OFF, 80 OUTPUT CUTOUT(5-15V)
RTH3 60 FAN ON, 50 FAN OFF, 85 OUTPUT CUTOUT(24-48V)
I/P-O/P:3KVACI/P-FG:1.5KVACI/P-FG:0.5KVAC
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation
3. Ripple & noise are measured at 20MHZ of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
4. Line regulation: min & max voltage of the rated load.
5. Load regulation: load from 0 to 100%
