Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> Non functional
> Electrical
> Detroit
> Coppus pv-2000CFM portavent extraction exhaust vent fan
Coppus pv-2000CFM portavent extraction exhaust vent fan
Portable COPPUS Engineering PV-2000 CFM Portavent Extraction Exhaust Ventilation Fan Portable Auto Shop. This is an extremely nice, albeit, expensive fan.
See the following link for the factory website.
"Versatile Centrifugal Ventilator for Source
The website only shows up to PV-1000 but based on its specs, this PV-2000 is about 2000 CFM. It seems to be stronger on suction than pressure. This unit seems to have a precision intake fitting with anemometer tube fittings. It looks like it was used for some relatively high-tech evacuation application, if it was used at all.
This unit is on wheels making it easy to move around. Looks like it would be great for exhausting engine fumes from an automotive/truck/tractor, etc. repair shop.
New replacement cost for this unit is reported to be about $3000.
Model 150025300 looks more like a serial number than an SN.
Note the intake ram air sensor tube in the image above. A matching non-ram side wall port is at 180 degrees and another at 30 degrees.
Intake and outlet are about 8" diameter.
If you look close, you can see the fan wheel in the image above. The blades are very long.
We estimate the fan wheel diameter at 12 to 13 inches.
The motor is 2 hp 3-phase. This is a rather screaming fan for only 2hp.
This unit is about 37.5 inches tall overall. Note the precision vacuum fitting type flange.
Overall diameter is about 29".
Additional similar items maybe listed separately or available on request.
Might be just what you need for your high volume small explosion proof suction fan application.
Condition looks new never used but hooked up and tested. We think it was modified from its original tubular frame to mount on wheels in a vertical rather than horizontal position.
