Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> Non functional
> Electrical
> 16" impulse sealer bag manual closer + kit jorestech
16" impulse sealer bag manual closer + kit jorestech
NEW - IN BOX - MANUAL IMPULSE SEALER
High Power Transformer, Faster Sealing, Lower Energy Consumption, Can Seals Thicker Bags
CHECK BELOW FOR AVAILABILITY IN YOUR AREA
16 inch(400 mm ) sealing length
0.12 inch ( 3mm) wide sealing
Includes Full Spare Parts Kit:
Impulse Sealing System - Seals Uniformily - Every Time
Dimensions: 22 (560 mm) (L) x 3.5 (89 mm) (W) x 7.08 (180 mm)(H)
Machine Weight: 9 lbs. (4.05 Kg)
Boxed Dimensions: 22.75 (578 mm) (L) x 5 (127 mm) (W) x 7.5 (190 mm)(H)
Boxed Weight: 10 lbs. (4.5 Kg)
Happy with your purchase? Please leave us 5 star rating
FREQUENTLY ASKED QUESTIONS (FAQs)
Can this machine seal foil or laminated bags?
Yes, it is designed to seal any thermoplastic material, including Polyethylene, Polypropylene, and laminations containing foils, such as those used to package coffee, or those that reduce electrostatic charge that are typically used to package electronic components.
How big of a bag can I seal on this machine?
In theory you could seal bags as wide as the seal element is. In practice, though, this would mean centering the bag perfectly onto the machine, something that is difficult to do if you need to seal many bags. Take the total heat element width, and subtract 1 inch ( 2.5 cm). That is the approximate width of the biggest bag you should seal on any given model.
How do I figure the settings to seal my bags?
Setup is an extremely simple procedure and should take no more than a minute or two. Before you begin read all machine documentation carefully as it includes important safety information. Plug in and turn on Sealer (if applicable). Set up sealing time knob to level one. Put bag in sealer and test. If the bag is not sealed increase sealing timer to the next level. Repeat the process until you get the minimum time necessary to seal your bag.
Do you recommend any parts we should keep in stock?
You should always keep a few Heating Elements and Teflon Strips, as these have a limited life span. The machines come with a kit of spares, but keep an eye on how many you have left.
How often should I change the Heating Elements and Teflon strips?
These machines come equipped with Teflon-infused fiberglass strips, and flat-type heating elements with terminals. Factors that affect component life span include the type, quality, and thickness of the material you seal, how often the machine is used, how its operated, and how its maintained.
Here are a few tips that will extend the life of your components:
a) Use the minimum necessary temperature to seal the bags
b) Keep the machine free of plastic build-up or debris by carefully applying a clean rag over it
c) Spray liquid silicone on the sealing area - it acts as an additional agent against adhesion and helps dispel heat away from the fabric
Can we send you samples of our product for testing or advice?
Yes. We will gladly test your product and suggest the best alternatives for your particular need at no cost to you. Please contact us for instructions on our testing procedures.
I need something faster than what you are offering here
We offer semi-auto to fully automatic Impulse, Constant Heat, and Band Sealing Machines. Check our other listings or contact us for more information. We do not list all of our offerings.
