Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> New
> Mechanical
> Detroit
> 150 ft. 1/2 in 120V chasing ropelight, lighting
150 ft. 1/2 in 120V chasing ropelight, lighting
150 FT. CHASING 120 VOLT ROPELIGHT
DUO Colors: Red/Yellow, Red/Clear, Green/Clear, Blue/Orange, Green/Yellow, Purple/Clear
* SPECIFICATIONS: 1/2 in. 120 Volt Chasing Bend-a-Lite
* INCLUDES: 50 Snap Clips, 5 Splicers, 5 Connectors, 5 Endcaps, 1 Chasing Controller and Instructions
* FEATURES: Multi Function Controller can do different speeds and blinking patterns
* ADDITIONAL INFO: Easy to use and bend, comes ready to plug in
* What can you do with BEND-A-LITE?
New uses are constantly being developed for BEND-A-LITE. Your creativity is your only limit. Here is just a brief list of some common uses. Attract Attention - Create Excitement - Extravaganzas - Landscaping - Outline Buildings - Exhibit Booths - Signs - Decorations - Bars - Vans - Motorhomes - Boats & Cars - Dance Floors - Pools & Spas - Cabinets - OEM Products - Amusements - Games. BEND-A-LITE is the answer to hundreds of hard to light areas and old lighting dilemmas.
Yes. BEND-A-LITE may be cut with common scissors at 18 inch increments. Chasing and Duo-Color BEND-A-LITE can be cut at 36 inch increments. Cut points are clearly marked. Together with our Splicer and 6 ft. Electrical cord, you may easily re-electrify BEND-A-LITE in just seconds.
* Can BEND-A-LITE be spliced to other colors or different lengths?
Yes. Up to 150 ft. can be plugged into an outlet regardless of how many colors are spliced together.
* If one bulb goes out, do they all go out?
No! With special wiring, only that particular bulb goes out. The rest remain shining bright as ever. Because of the special BEND-A-LITE polymer used, light continues to pass through avoiding dark spots.
* How much electricity does BEND-A-LITE draw?
BEND-A-LITE has been economically designed and engineered. A standard 30 ft. roll containing 360 bulbs uses slightly more than 150 watts
* How do you attach BEND-A-LITE?
There are many ways to attach BEND-A-LITe. When attaached to wood, metal or mica, our snap clips or channels give quick and professional results. There are dozens of alternatives depending on your particular use.
* Is BEND-A-LITE UL approved?
Yes. Standard 110 volt BEND-A-LITE in both 1/2 and 3/8 inch diameters have been UL approved.
Call us at (***) 425-4679 2009 Bendalite Inc Hampton VA USA
