Machine Parts For Reuse Newsgroup Discussion Forum > Small Size Parts
> New
> Mechanical
> Dallas
> Atlas metal cold food drop-in unit |wcmx-2
Atlas metal cold food drop-in unit |wcmx-2
Atlas Metal Cold Food Drop-In Unit |WCMX-2
Cold Food Drop-In Unit Designed for Remote Refrig. System 2-Pan Size
The WCM series refrigerated cold pan eliminates the mess and expense of ice in your cold food displays. The drop-in pan can be installed in virtually any counter and can be provided as fully self-contained - just plug it in and turn it on - or remote, where there's a need to locate the compressor at a different location. The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that is can be installed in the finest wood fixtures without marring the counter top. The pan is provided with a 3/4" stainless steel drain. The cold pan accommodates standard 12" x 20" pans, perfect for any cold food serving application.
o Utilizes standard 12" x 20" pans, or fractional size pans with the use of adapter bars
o NSF certified; UL and CSA recognized
TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface of the top to hold the removable adapter bars in place.
LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. A 3/4" dia. drain with strainer, 4" PVC nipple, and valve is provided.
INSULATION: The pan is fully insulated with high density polystyrene, 1" thick on all sides, 2" thick on the bottom and enclosed with a 22 gauge galvanized steel outer lines. The entire unit is removable without the use of tools.
REFRIGERATION SYSTEM: (WCM series only) The compressor housing shall be fabricated from 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and ready to operate.
ELECTRICAL: (WCM series only) The unit will be wired for 15 amps., 120 volt, single phase operation with an on/off thermostat switch and pilot light. A 6' long, 3-wire cord and plug (NEMA 5-15P) will be provided. Specifications subject to change without notice.
***IMAGE DISPLAYS SIMILAR ITEM- NOT ITEM ITSELF***
Cold Food Drop-In Unit, insulated pan, stainless steel inner liner & top, galvanized steel outer liner
Atlas Metal Adapter Plate (1) 6-1/2in & (1) 10-1/2in |AD-2610
Adapter Plate - (1) 6-1/2" and (1) 10-1/2" diameter inset holes, S/S construction, full perimeter beaded edge, NSF certified, fits any standard 12" x 20" opening (ATM-AD2610)
Atlas Metal Adapter Plate (2) 8-1/2in Inset |AD-28
Adapter Plate - (2) 8-1/2" diameter inset holes, S/S construction, full perimeter beaded edge, NSF certified, fits any standard 12" x 20" opening (ATM-AD28)
Atlas Metal Adapter Plate (3) 6-1/2in Inset |AD-36
Adapter Plate - (3) 6-1/2" diameter inset holes, S/S construction, full perimeter beaded edge, NSF certified, fits any standard 12" x 20" opening (ATM-AD36)
Atlas Metal Adapter Plate Carving Station Sloped Gravy Pan |AD-GP
Adapter Plate - Carving Station with Sloped Gravy Pan, S/S construction, full perimeter beaded edge, NSF certified, fits any standard 12" x 20" opening (ATM-ADGP)
Atlas Metal Adapter Plate Carving Station Slope Gravy Pan |AD-GPD
Adapter Plate - Carving Station with Sloped Gravy Pan - Double Width, S/S construction, full perimeter beaded edge, NSF certified (ATM-ADGPD)
Atlas Metal Adapter Plate 16-1/2in Inset |AD-18B
Adapter Plate - 16-1/2'' diameter inset hole, S/S construction, full perimeter beaded edge, NSF certified (ATM-AD18B)
Atlas Metal Adapter Plate 18-1/2in Inset |AD-21B
Adapter Plate - 18-1/2'' diameter inset hole, S/S construction, full perimeter beaded edge, NSF certified (ATM-AD21B)
Atlas Metal Corian Top (1) 16in Cut-Out |CTS
Corian Top, with (1) 16" cut-out, 1/2" thick, Cameo white, use with SF-22 (ATM-CTS)
Atlas Metal Adapter Frame S/S 22in x 27-5/8in |SF-22
Adapter Frame, 22" x 27-5/8", stainless steel, use with CTS (ATM-SF22)
