Machine Parts For Reuse Newsgroup Discussion Forum   >   Small Size Parts   >   New   >   Electrical   >   Los Angeles   >   880 resistors, 240 capacitors in network-arrays +bonus

880 resistors, 240 capacitors in network-arrays +bonus


[1a] 50, 1N4148 very fast Diodes (Recovery time @ 10mA = 1.2nSec.; @60mA = 4nSec: 0.5 Watt, 100V; Surge current: For 1Sec. = 1.2Amp; 1mSec. =5Amp. Also, as a Electronically Variable Capacitance by reverse bias of 0.1V to 10V: The Capacitance varies from 4.5pF to 0.9pF). [1b] 100/ea, Inductors 16uH ; [1c] 14V Zener; [1d] 18V Zener; [1e] ~13V Zener (1N1047?).
[3a] 50 Transistors: 2N4401; [3b] 2N3414 PNP; [3c] SPS8810RLR [3d] SPS9248; [3e] SPS8421; [3f] SPS8476RL; [3g] 2N4124.
[4a] 50 1/2W Resistors tested at 1.2 W with no discoloration: 1 Ohm; [4b] 4.7 Ohm; [4c] 12 Ohm; [4d] 15 Ohm; [4e] 20 Ohm; [4f] 56 kOhm; [4g] 82 Ohm; [4h] 100 Ohm, 1/2W; [4i] 220 Ohm; [4j] 470 Ohm; [4k] 200 Ohm; [4l] 39 kOhm.
[5a] 30 Miniature Potentiometers 200; [5b] 10k; [5c] 25k; [5d] 5M.
I have many other electronic parts and different values: High Power (HP)Transistors, TIP's, Volt-Regs, and small/large diodes, (High-Power)-bridge Rect. 25A 50V, 10A 250V and others,many 1000's IC's all kinds, LM's, UA's Amps, Processors, Anything, some probably obsolete, IC/PCB-sockets, 3' BNC Dual Coax Cables, Resistors, microwave Chip resist, ceramic disc-, electrolytic-, regular, micowave-Chip caps, trimmer caps(Like, ceramic i.e. 35pF, ~3900pcs, etc.) 10s of thousands of Chip/Regular: Resistors Caps Transistors Diodes, etc on rolls and 5000's on rolls, and boxes, inductors, wire crimp type or solder male/female connectors on rolls, multi-pin of all kind, Yellow, Blue, Green, White ~1/4' LED's, Red ~1/2" 4 digit and +/- Numerical displays/sockets, Miniature IC-displays, lots of analog Panel Meters, Switching power supplies, Tr/Di-heatsinks, and more, Push button-, Sliding-, Toggle-, Miniture PCB array toggle-,other Panel switches, Electronic relays of all kinds, Dummy loads Low/High Power, etc. This is just a drop in the bucket, I opened only 5% of the boxes, I have a volume of ~10X20X6 cubic feet!! Stores, or distributors, who are interested in bulk purchase are welcome. Just let me know.
[5] 1000's of SCR's, Triacs, Voltage Reg's, and others. Special: I have 2 very big SCR's, probably 1000Amps (The post is 1/2" diam.The lead is 1/4" diam.) Also 3 big DIODES (2 very good ones and one has a 5% reverse bias leak but still very useful): 20T3N's, 40V, Probably also 1000+Amps, leads are 3/8" diam.
1p/million Accuracy 7.15905 MHz; 13.230 MHz, All Kinds of IC/PCB-Sockets, connectors (like CPU Power Supply, etc.) square-PB-Slide-Toggle-miniature normal-PCB-switches. Displays: single/set's of 4 w/o +/- 1/2";1" and miniature IC/ Op-Amps/Inductors variable-lot's of Panel Meters/Regular/Mica(Also Big ones for Band switching)/Ceramic/E-L/AC-Bypass/ (up to large values and high Voltage)(Bandwidth up to 300MHz)/All sorts of Power Supplies-plug-in (Zenith: 12V;800mA, 100's of them), and switching. Delay Lines. Hard Ware. Resistors by the10,000's, also High Power. Potensiometers miniature and larger.BNC cables, Flat multi-conductor20-54 cond. Printer Ribbons (Mannes Mann Tally)



880 resistors, 240 capacitors in network-arrays +bonus