Machine Parts For Reuse Newsgroup Discussion Forum > Medium Size Parts
> Used
> Mechanical
> St. Louis
> Vision solvent recovery recycle distillery system 3 gal
Vision solvent recovery recycle distillery system 3 gal
Vision Medical 3 Gallon Solvent Recovery Recycler System
Excellent cosmetic and tested working condition. It lights up, powers on, heats up and the cooling fan is running. The thermic oil tank is near full. I guarantee it will not be DOA.
The actual distillery rests in a stand where it can be tipped and locked in any position. (see pics). The tank holds up to 12 liters (3 gallons). Uses a thermic oil for heating and there are two outlet pipes on the bottom for the finished product. There is a control knob to set a 2-4-6 hour cycle.
Solvent Recovery Recycler System
12 Liter capacity (3 Gallons)
Vapours Temp Gauge (50-250C)
Excellent cosmetic and working condition. The testing I was able to conduct is plug the system in and it lights up, heats up and the cooling fan is working. Not a whole lot to go wrong with a system like this. All indicator lights are working. All knobs are working properly. The tilt mechanism is working properly. The lid is properly working. There is some staining from previous use on the inside.
Unknown .doesn t look very old.
As always, I stand behind everything I sell and I guarantee this Vision Solvent Recovery System is exact to the pictures and description I have provided here.
Weight before packing is 185 lbs.
(Pallet weight 240 lbs) It is a freight class 85. (NMFC 107890) Pallet dimensions are 48 x 40 x 61 .
Pickup is always welcome. It is located in Coolidge Arizona 85128 which is about 40 miles SE of Phoenix Arizona near I-10
