Machine Parts For Reuse Newsgroup Discussion Forum > Medium Size Parts
> Used
> Mechanical
> Detroit
> New rough service hid wet location 70W round eyelid
New rough service hid wet location 70W round eyelid
lithonia VGR2C 7OS 277 DWHG LPI
S62 70 WATT LAMP INCLUDED (hps)
Architectural deep-cast luminaire provides general illumination for
rough service (vandal resistant) applications. Ideal for interior or exterior applications
where safety and security are a concern.
Certain airborne contaminants can diminish
Click here for Acrylic Environmental Compatibility table for
Designed to complement building architecture and to endure extreme
environmental conditions and physical abuse.
Bezel - One-piece, marine grade die-cast aluminum, low copper alloy
(<1% copper). Encloses lens and secures to housing with stainless steel Torx
screws (two included) or optional stainless steel tamper-resistant screws (see Options).
Housing - One-piece, marine grade die-cast aluminum, low copper alloy (<1% copper),
with post-painted polyester powder coat finish. Four hole mounting detail for use directly
over outlet box, or conduit entry through three 1/2" threaded openings on side or 3/4"
threaded opening on rear surface.
Gasket - Polycarbonate: Perimeter lens gasket is one-piece silicone "O" ring, mechanically
held in lens channel. Glass: Perimeter lens gasket is closed-cell silicone. Pad
mounting gasket is closed-cell neoprene and seals housing to mounting surface. Gaskets
Standard finish is textured polyester powder coat in white, black or bronze.
Optional architectural colors available (see Options).
Lens-polycarbonate Translucent white, injection molded, UV
stabilized lens is .125 inch thick. Smooth exterior allows for easy cleaning, and interior
pattern diffuses light for even surface illumination.
Lens-glass Tempered borosilicate lens, .250 inch thick, has smooth exterior for easy
cleaning and textured interior.
Reflector Internal reflector is semi-specular aluminum, with high-reflectance white
powder coat perimeter for maximum light output. Lamp positioning assures uniform
Ballast - High Reactance, High Power Factor with starting
temperature of -20 F (-29 C), Metal Halide; -40 , High Pressure Sodium.
Socket - Medium base porcelain with copper alloy, nickel plated screw shell and center
contact. UL listed 660W, 600V, 4KV pulse rated.
Lamp - Lamp included unless specified L/LP.
UL Listed to US and Canadian Safety Standards (see Options). UL listed for
oC ambient and wet locations. IP65 rated.
NOTE: Specifications subject to change without notice.
