Machine Parts For Reuse Newsgroup Discussion Forum > Medium Size Parts
> Used
> Mechanical
> Detroit
> 350 kw genset backup power hot-start on big diesel tank
350 kw genset backup power hot-start on big diesel tank
469 KVA and 120, 139, 208, 220, 240, 277, 380, 416, 480 voltage choices
* * 469KVA 375KW @ popular voltages
* Integral fuel tank and enclosure
* wide selection of volatages 120 to 480V
* 50 to 60 hertz speed choice
* multiple remote control panels
* hot engine coolant manifold
* ~ 16,000 lbs. 142x74x120" (with muffler removed) raw-Crane required for load/unload.
Note the large integral fuel tank. The fuel fill and level gauge are shown below.
These images were taken just as the unit had been in service. We did not do any dusting or cleanup.
These images were taken where the unit has been installed, before we removed it. The surfaces are rather dusty as shown but otherwise excellent condition.
Many voltage options. 120, 139, 208, 220, 240, 277, 380, 416, 480
The image above shows the heater that keeps the engine hot so it is ready to start and run any time.
Note that there are only 646 hours on it. This came from weekly maintenance checks to make sure it was always ready to go.
These images show the unit mounted control panel. There are two additional remote control panels included with the overall system.
This is one of the remote system control panels.
These images show the Detroit Diesel engine that powers it.
This Might Be Just What You Need For serious hot-start backup power Application.
