Machine Parts For Reuse Newsgroup Discussion Forum > Medium Size Parts
> Used
> Mechanical
> 5M 3528 led white light strip + 12V 2A power + dimmer
5M 3528 led white light strip + 12V 2A power + dimmer
L.O.W Technology Co., Ltd is a professional manufacturer which specializes in manufacturing, developing and selling LED lights and LED appliances since 2006,We have various kinds of products which include LED strips series, LED T8 & T5 tubes series, Led energy saving lights series, The Led energy saving lights include the LED ceiling lights, LED down lights, LED wall lights ,LED bed lights, Led mirror lights, Led wall washer, LED signs Lights .LED advertising lights , etc.All of our LED products passed : CE,FCC, and RoHS approval.
5M SMD3528 White LED Flexible Strip+12V Power+DC 12V 8A dimmer
* Emitted Color : White (NON-WATERPROOF)
* we are also have waterproof LED for option ,you can contact me
* SMD lamps mounted, high reliability.
* Available in DC12V & 3-leds cuttable with the mark
* Operating temperature: -20 C ~+45 C
* Long operation Life : 50,000~80,000Hrs
* Matach the RGB controller & Power supplier system
* Lower heating during operationg
* Continuous length with the quickly connector
* Reel pcaking & strong adhesive back (Except WFS)
* Size. : W0.8 x L500(cm) Thickness : 0.25(cm)
Application: -How Question about this product? Click Here!!!
* Architectural lights for canopy, corridor, window, archway
* Emergency hallway lighting Auditorium walkway lighting
* Backlight or edge lighting for signage
* Archway, canopy & bridge edge lighting
* Amusement park, theater & aircraft cabin mood lighting
* Decorative lights for holiday, event, show, exhibition
* Dimmer is a led controller that it can adjust brightness infinitely,its control mode is knob-operated control, you could adjust light to the appropriate lighting brightness in accordance with your actual need.
* Working temperature: -20-60 degC
* External dimension: L89 x W59 x H35 mm
* Packing size: L160 x W95 x H51 mm
* Static power consumption: <1 W
1.Adopt buttons control, and every button function as follows:
* Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
Adopt male and female connector with screw
2.Adopt rotary button, its function as follows:
* Rotate button to the right, brightness will be brighter, when you rotate it to the far right, the brightness is greatest
* Rotate button to the left, brightness will be darker,when you rotate it to the far left, the light will be turned off
* Supply voltage of this product is DC12V never connect to DC24V or AC220V directly
* Never connect two wires directly in case of short circuit
* Lead wire should be connected correctly according to colors that connecting diagram
* Warranty of this product is one year, in this period we guarantee replacement or repairing with no charge, but exclude the artificial situation of damaged
* Solder connection should only be performed on designated solder pads (marked +/- ). During soldering, don t exceed the maximum soldering time of 10 seconds and the maximum soldering temperature of 260 Celsius degrees.
* The smallest unit (50mm or 100mm - 3 LEDs) can be removed by cutting with scissors between the designated solder pads.
* The mounting of the strip is facilitated by means of the double-sided adhesive on the back-surface of the strip. Care must be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt
partide. The mounting substrate must have sufficient structural integrity. Take care to completely remove the adhesive backing. Once the strip is appropriately positioned. Press on the strip with about 20N/cm2 (refer to application techniques of 3M adhesive transfer tapes).
* The minimum bending radius is 2 cm. The strip may be bent over a smaller radius of the circuit board containing no electronic components and such bends should be made once and fixed in position to avoid cyclic fatigue.
* 1x 5 Meter 300P White 3528 LED Strip (with 3M Adhesive sticky backing, Yellow backing strip is default)
* 1x 12 V power adaptor (for US/ UK/AU/EURO...)
* 1,This price is only for white colour Strip. we also have other colour such as Warm White,Blue,Yellow,Red,Green,Purple.Click Here!
* 2,If you need waterproof strip,please add $8 for cost.thank you.
* 3,We have our own Factory,and all products passed CE,FCC, and RoHS approval.we can offer any length,waterproof or non-waterproof,Yellow backing strip,White backing strip or Black backing.12V power or 24V power,low lumen or higher lumen,or can tailor for your any need.
* All LED Strip is packed as vacuum-packed.
* We also have other products such as T8 LED Tube, T5 LED Tube,LED Lamps,LED Cabinet Light,LED Wall Lamps.High Power Spot Light,LED Drop Light and so on.Please Click Here to contact us for more information.
This product has a one-year warranty. Please contact us firstly when you have any questions about the products. thank you in advance.
Defective products must be returned within 30 days from the date you placed your order.
It may take up to 7 business days to process your return after we receive your product.
