Machine Parts For Reuse Newsgroup Discussion Forum > Medium Size Parts
> Used
> Electronic
> New **** bunn FMD5 cappuccino machine 5 flavor****
New **** bunn FMD5 cappuccino machine 5 flavor****
* Large, lighted front graphics for merchandising.
* 6.4 gallon (24.2 liters) hot water tank to meet peak serving times.
* Cup clearance at 7" (17.8 cm) to accommodate common cup sizes.
* Electrical and plumbing components easily accessible through front and top.
* Variable speed motors allow control of product consistency in mixing chamber (0.75 to 6.6 grams of powder per second).
* High speed, heavy-duty whipper for complete product mixing.
* Front of machine access to tank drain for easy service.
* Key lock on the door prevents tampering.
* Crated Weight: 123.00 lbs.
* Category: Specialty Drink Dispensers
* Display Graphic: Cappuccino
* Manufacturer: Bunn-o-Matic
* Also Known As: FMD-5 BLK, 34900.0000, FMD5BLK, 349000000, 34900-0000, BUNFMD5-BLK, 234FMD5-BLK
* Manufacturer Part Number (MPN): 34900
* Cord Attached: Yes (NEMA 5-15P)
* Dimensions: 29.3" H x 18.6" W x 21.2" D
* Brewing Capacity: Based upon incoming water temp of 50 F (10 C).
* Electrical: Models require 2-wires plus ground service rated 120V, single phase, 60 Hz.
* Plumbing: 20-90 psi (138-621 kPa) from a 3/8" (10 mm) or larger supply line. A shut of valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce it to 50 psi. Supplied with 3/8" (10 mm male flare fitting.
