Machine Parts For Reuse Newsgroup Discussion Forum > Medium Size Parts
> Used
> Electrical
> Cleveland
> New dyna-blue heavy duty cable lubricant dyna blue 1QT
New dyna-blue heavy duty cable lubricant dyna blue 1QT
Dyna Blue Heavy Duty Cable Lubricant
Lubricity: PVC or XLP-jacketed cable on PVC conduit at 200 lbs/ft (2.9 kN/m) normal pressure; coefficient of dynamic fiction
PVC or XLP-jacketed cable on EMT conduit at 200 lbs/ft (2.9 kN/m) normal pressure; coefficient of dynamic friction
Percent non-volatile solids: 2.5 to 3.5%
Appearance: Thick, light-blue gel material
Wax, grease and silicone content: none
Temperature use range: 20 F to 140 F (-5 C to 60 C)
Cable compatibility: No deleterious effects on physical or electrical properties of common* cable jackets.
Polyethylene stress cracking: No stress cracking on LDPE cable jacket when tested by ASTM D1693.
Cling factor: Six inches (15 cm) of a one-inch (2.5 cm) diameter cable will hold at least 75 grams of lubricant for one minute when held vertically (at 70 F/20 C).
Temperature stability: No more than 10% change in Brookfield viscosity from 40 F to 100 F (5 C to 38 C). No phase-out after five freeze/thaw cycles or 24-hour exposure at 120 F (50 C).
Toxicity: Non-toxic and non-sensitizing. Industrial use only.
Cleanup: Complete cleanup possible with water.
Flammability: Lubricant has no flash point and dried residue is non-flammable.
