Machine Parts For Reuse Newsgroup Discussion Forum > Medium Size Parts
> Non functional
> Mechanical
> Sigma systems 52/80AC environmental test chamber works
Sigma systems 52/80AC environmental test chamber works
Sigma Systems 52/80AC Environmental Test Chamber (062606606260)
Sigma Systems 52/80AC Environmental Test Chamber
* Serial Number: Quantity Available
* Electrical Requirements: 120 Volts, 5 Amps
* With a Model C Single Set Point
* Inside Dimensions: 16 W x 13 D x 25 H
* Overall Dimensions: 20 W x 26 D x 36 H
* Operation Manuals for Chamber and Controller BOTH included!
* This unit is being sold as HEAT TESTED unit WORKING!! We are NOT able to test the cooling part of this chamber as we do not have the means of hooking up CO2 or LN2.
* Conversation with OEM: "Unfortunately, due to the age of the equipment (Model 52/80 s/n XXX and XXX ), I cannot confirm what the original specifications were. It would be best to assume the high temp is no more than +200C. That is our standard high temperature. There are no notes that these had custom temperature ranges. I am not able to determine which coolant (LN2 or CO2) this system was originally configured for use with. The coolants themselves will constrict how low of temperature you can reach. Use with CO2 would allow a low temp of no more than -65C. Use with LN2 would allow a low temp of no more than -99C."
* The Sigma Systems Test Chambers are tall, compact chamber designed for bench top use. With the controller mounted on top, the chambers small footprint is a welcome feature in crowded environments. A hinged door is standard.
