Machine Parts For Reuse Newsgroup Discussion Forum > Medium Size Parts
> Non functional
> Electronic
> Los Angeles
> Non contact voltage volt detector stick led tester CF3
Non contact voltage volt detector stick led tester CF3
New Pocket Digital Voltage Tester Pen Detector Meter
* Fits in a shirt pocket for convenience
* All outer surfaces are non-conductive for safety
* Detects voltage without metallic contact
* Quickly locates the hot, neutral and ground terminals in any receptacle
Before each use, make sure tester is in order or not by testing a known working circuit that is within the rating of this unit, when the tip of tester lights, it means voltage exist, if no any indication, voltage could still be existed not rely on this Unit with shielded wire. Operation may be affected by difference in socket design and insulation thickness and type
* Operating: 90 V ac to 1000V ac
* Temerature:-10 to 50
* Humidity:80%(0 to 30 )
* Cleaning: Clean with damp cloth
* Place two AAA alkaline batteries into unit and replace the battery cover as indicated in figure
* When the tip of tester is near to live wire(L) or the hole L of a socket, red light appears in the top of tester. In this way the presence of AC voltage can be checked
* The finger of operator should be away from the white part of the tester in each operation
* When the batteries is going to be exhausted, the unit will not work normally, please replace new battery in time
To avoid possible electric shock or person injury:
* Do not use if tester appears damaged, the casing is broken or tester can not work normally
* Do not apply more that rated voltage as marked in the tester
* use caution with voltage above 30V ac as a shock hazard may exist
We aim to provide the best service and products!! Please leave a chance for us to communicate with you in case there is any problem. Thank you very much.
