Machine Parts For Reuse Newsgroup Discussion Forum > Medium Size Parts
> Non functional
> Electrical
> New York
> Hydraulic hammer breaker bucket linkage dipper pins
Hydraulic hammer breaker bucket linkage dipper pins
THE LARGEST HYDRAULIC HAMMER WEAR PARTS WAREHOUSE IN THE WORLD.
ONLY AT FEL-TECH HAMMER DIVISIONTM
"THE CONTRACTOR'S CHOICE FOR REBUILT HAMMERS"TM
OVER 72,000 HYDRAULIC HAMMER WEAR PARTS IN OUR DATA BASE
OUR RECENT REBUILT HAMMERS ARE NOW ON SITE BREAKING LAVA ROCK FOR THE INSTALLATION OF TEN 300 TON LIQUEFIED GAS HOLDING TANKS IN MEXICO.
THIS IS WHAT SEPERATES FEL-TECH HAMMER DIVISION FROM OTHER REBUILD COMPANIES....PERIOD!
PINS-BUSHINGS-SLEEVES-BOSSES-SHIMS AND SHAFT COLLARS
WE HAVE PINS AND BUSHINGS FOR EVERY HAMMER AND MACHINE EVER PRODUCED
FEL-TECH HAMMER DIVISION HAS OVER 5000 FEET OF GROUND AND POLISHED SHAFTS IN STOCK AT ALL TIMES.
WE HAVE THOUSANDS OF BUSHINGS, SHAFT ENDS, SHIMS, SLEEVES AND SHAFT COLLARS IN STOCK AT ALL TIMES.
ALL FEL-TECH HAMMER DIVISION ALL OF OUR PINS, BUSHINGS, BOSSES, SLEEVES, SHAFT COLLARS AND SHAFT ENDS ARE HIGH QUALITY 4140 AND 4150 STEEL
* WORKABILITY - Alloy C4140 is an oil-hardening steel of relatively high hardenability. Its chromium content provides good hardness penetration, and the molybdenum imparts uniformity of hardness and high strength. C4140 responds well to heat-treatment and is comparatively easily machined in the heat-treated condition. With a combination of such highly desirable properties as good strength and wear resistance, excellent toughness, coupled with good ductility, and the ability to resist stress at elevated temperatures.
* APPLICATIONS - Drill collars, bolts, rotary table shafting, axle shafts, chain links, rams, piston rods, etc.
* Mechanical Properties - Tensile Strength 95,000 PSI, Yield Strength 60,000 PSI min.
Converted from Brinell hardness.
Converted from Brinell hardness. Value below normal HRC range, for comparison purposes only.
annealed and cold drawn; based on AISI 1212 as 100% machinability
OUR PINS, BUSHINGS, BOSSES,SHIMS,SLEEVES AND SHAFT COLLARS SIMPLY ARE THE BEST ON THE MARKET TODAY.
ALL PINS ARE HARDENED STEEL, GROUND AND POLISHED
PINS ARE AVAILABLE WITH HOLE THROUGH CENTER FOR GREASE FITTINGS
WE ALSO OFFER ALL SIZES FOR GREY MARKET MACHINES
WE MANUFACTURE ALL SIZES IN THE INDUSTRY FOR ALL HAMMERS, STICKS, BOOMS AND BUCKETS FOR ALL MAKES AND MODELS OF MACHINES
FROM 35MM UP TO 110MM (1.377" UP TO 4.330")
LARGER DIAMETERS UP TO 24" DIAM. X 6' LONG UPON REQUEST FOR LARGE MINING EQUIPTMENT
KEEP YOUR MACHINE AND PROJECT ON SCHEDULE
WE OFFER EMERGENCY DELIVERY IN ALL 48 STATES BY 8:00 A.M. THE NEXT DAY
DO YOU HAVE A NEED FOR AN OVERSIZED CUSTOM BUSHING, SLEEVE OR PIN?
We also manufacture super size bushings and sleeves up to 24" for large oil field and quarry machines that are built on site.
VISIT http:// / FOR MORE PIN AND BUSHING INFORMATION
