Machine Parts For Reuse Newsgroup Discussion Forum   >   Medium Size Parts   >   Non functional   >   Electrical   >   Dallas   >   Clamco bench mounted universal heat sealer 36" mdl 255B

Clamco bench mounted universal heat sealer 36" mdl 255B


WARNING! I would rather lose the sale than someone get hurt so please read the following warning carefully. If you are looking for a heat sealer to shrink-wrap a few packages a day for your store or church, this is NOT the sealer you need. You need a heat gun and a small bar sealer that cools down between each seal. This CLAMCO sealer is for high production continuous work. The heat bars on this unit get very HOT and stay on between each use, as you can see in the photo I took of the temp guage when it was on. It takes about 10 minutes to heat up and a bit longer to cool down. You can get burned very bad if you do not know what you are doing. PLEASE BE CAREFUL!
NOTE: This model is made to be mounted on a table with a foot-operated pedal underneath. Many of you have asked about another sealer you saw with a handle on top, but that handle is a dangerous "homemade" add on. This unit was NEVER made to have a handle on top because it would require drilling holes in the main castings, which weakens the cast iron. Ask CLAMCO; they will tell you the same thing.



Clamco bench mounted universal heat sealer 36 Clamco bench mounted universal heat sealer 36 Clamco bench mounted universal heat sealer 36 Clamco bench mounted universal heat sealer 36 Clamco bench mounted universal heat sealer 36 Clamco bench mounted universal heat sealer 36