Machine Parts For Reuse Newsgroup Discussion Forum   >   Medium Size Parts   >   New   >   Mechanical   >   San Jose   >   New southeast cooler walk-in freezer 6' x 8'

New southeast cooler walk-in freezer 6' x 8'


All boxes include panels, floor, door with handle, locking mechanism, Assembly kit, 5-year panel warranty, etc. Refrigeration is not included as refrigeration needs vary. Please contact us for more info. Custom sizes are also available for outdoor and indoor systems.
All sizes listed below are available in our store with or without refrigration.
Walk-In Coolers and Freezers are assembled using prefabricated modular panels. These
panels consist of a metal clad expanded polystyrene or urethane insulation. They are
designed for fast and easy field assembly with convenient disassembly for relocation or
Panels are available in 4 and 6 thickness. Full width panels are 47 wide, with narrow
panels in various widths as required. Enclosure sections can be constructed in any size
The wall panels are joined together by cam-lock fasteners that are embedded into the
profiled panel edges. The cam-locks consist of a locking arm mounted on a rotating cam
anchored in the tongue edge and a steel pin that is anchored in the groove edge. By
rotating the locking arm with a hex wrench, the arm engages over the pin, and the rotation
of the cam draws both panels tightly together. The cam-locks are rotated from inside
the walk-in through access ports which are subsequently sealed with vinyl snap-in caps.
The panels consist of formed metal skins laminated to the insulation under pressure with
a structural adhesive. Insulation is either expanded polystyrene or urethane. This
process is carefully monitored to assure a high-quality structural bond that withstands
a wide range of humidity and temperature conditions.
All panels have tongue and groove edges to facilitate assembly and provide a tight, well
insulated panel joint. Flexible vinyl gaskets are permanently bonded on the tongue side
of all panels. These gaskets are resistant to water, detergent, oil, fats and sunlight.
Floor panels are constructed with 16 gauge galvanized steel or optional .080 aluminum
interior skin. The floors are reinforced to withstand uniformly distributed loads up to
600 pounds per square foot. When using mobile carts or dollies we recommend
aluminum tread plate or heavy 10 gauge galvanized steel floors.
Expanded Polystyrene has a stable K factor of .24 at a 40 degree mean temperature,
with corresponding R values of 16.7 for 4 material thickness and 25 for 6 thickness.
Nominal density is 1 lbs. per cubic foot. Polystyrene core material when tested in the
4 thickness per ASTM E-84 (UL Procedure 723) has a flame spread of less than 25
and a smoke developed ratio of less than 450. 4 Polystyrene material is used on
walk-in coolers and 6 Polystyrene is used on freezers.
The standard door unit consists of a hinged door, flush mounted in a 47 wide panel with
a clear opening of 34 wide X 78 high. A vapor proof light fixture, light switch with pilot
light, and 2 dial thermometer are mounted in the framed door assembly. The lighting
fixture and switch are prewired at the factory. Freezer doors have anti-sweat heaters in
both the door leaf and the frame section. A replaceable magnetic gasket seals the door
at the top and the two sides. The bottom edge of the door is sealed with a dual neoprene
sweep. Each door has two heavy duty polished chrome hinges with cam-lift action.
We can provide optional spring loaded self-closing type hinges and automatic door
closers. The door latch is polished chrome; is positive latching and has an adjustable
strike plate. An inside safety release handle is provided so the door can be opened
from the inside even when it is padlocked from the outside.
IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT US VIA EMAIL OR