Machine Parts For Reuse Newsgroup Discussion Forum   >   Medium Size Parts   >   New   >   Electronic   >   Chicago   >   Shanklin shrink wrapper model A27A w/shrink tunnel

Shanklin shrink wrapper model A27A w/shrink tunnel


Used Shanklin model A-27A automatic L-Sealer. Serial No. A92123. Electronics 1/60/230 volt, 20 amps. Plant air required is 0.5 CFM @ 50 PSI. With a 13 1/2" wide X 36" wide smooth transfer feed conveyor (takes 13" wide) and 18" X 40" discharge conveyor. Allen Bradley TCAT controls, with an SLC150 programmable controller. Maximum product height is 8". Seal size is 21" wide x 33" long. Equipped with a demand fed, powered film unwind.
This wrapper can handle up to 25 packages per minute. Package size change-overs are easily accomplished with hand cranks. The seal jaw area is covered with a Lexan safety enclosure.
The Shrink Tunnel is a Signature model D2412-TMC shrink tunnel with a 22" wide x 94" long buttom nylon mesh belt and a 15" wide X 70" long top nylon mesh belt. The top belt can be raised or lowered by (2) Von Weise satellite actuators. S/N 99091991. Electrics are 3 phase, 60 cycle, 208-240 volt, 50 amps. Excellent for flat packages.



Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel Shanklin shrink wrapper model A27A w/shrink tunnel