Machine Parts For Reuse Newsgroup Discussion Forum > Medium Size Parts
> New
> Electronic
> Chicago
> Kreg semi-automatic pneumatic foreman DB55
Kreg semi-automatic pneumatic foreman DB55
Easy adjust fence for varying material thickness.
Foreman comes factory set to center a screw in 3/4" thick material.
DB55 features a 3/4 hp pneumatic motor. Cfm rating of 6 cfm at 50% duty cycle (90-120 psi)
Clamping capacity of 1/2" up to 1-1/2" thick material.
* Now with automatic oiler for pneumatic motor
* 3/4 hp pneumatic motor, automatic air clamping
* 90-120 psi recommended - Minimum compressor cap. of 5.3 cfm @ 90 psi
* 1/2" to 1-1/2" material capacity
* Fast, semi-automatic operation; automatic "hands-free" clamping, quiet pneumatic drill motor with lever operated drill stroke.
* Reliable, one-step drilling operation; drills flat-bottom, round-sided pocket hole that can be plugged.
* Adjustability to handle 1/2" through 1-1/2" thick material.
* Stable work surface with easily adjustable "swing-stop" material positioning guides.
* Hinged-top that allows easy access to drill bit and motor.
When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the FOREMAN Pocket Hole Machine. The semi-automatic FOREMAN features a pneumatic drill motor and automatically adjusting air clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion supplies air to the clamping cylinder that automatically adjusts to your material thickness as well as activates the 3/4 hp drill motor. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position to cut the air supply.
