Machine Parts For Reuse Newsgroup Discussion Forum > Large Size Parts
> Used
> Electronic
> Austin
> Hobart handler 125 wire-feed welder — 115 volt, 125 amp
Hobart handler 125 wire-feed welder — 115 volt, 125 amp
Hobart Handler 125 Wire-Feed Welder 115 Volt, 125 Amp, Model# 500487
Description Rugged and portable, the Handler 125 operates off 115-volt household current. Comes ready to weld without shielding gas using 0.030-0.035in. flux cored wire. This unit has an optional solenoid valve for welding with 0.023 0.030in. solid wire and gas shielding (when used with MIG Conversion Kit item# 164796). Use C-25 gas (75% argon/25% C02) on 22-gauge, 1/8in. steel for cleaner weld with less spatter. Use Tri-Max gas and stainless steel wire for welding on 16- to 12-gauge stainless steel. MIG gas upgrade kit available for greater versatility (see Item# 164796). U.S.A. Key Specs
* Duty Cycle: 20% at 90 Amps, 19V
* Mig Ready: No, requires MIG conversion kit
* Wire Feed Speed Control: Yes, 0 - 500 IPM
* Weldable Metals: Steel and stainless steel
* Weld Thickness (in.): 18-gauge to 3/16in. steel
* Clamp Cable Length (ft.): 10
* Regulator and Gas Hose Included: No
* Shielding Gas Required: No
* Welding Wire Diameter (in.): 0.023 -0.035
* Dimensions L x W x H (in.): 9 7/8 x 12 1/8 x 16 7/8
* Comfortable H-9 gun with liner for 0.023-0.035in. wire
* Welds up to 3/16in. steel with flux core wire
* Three 0.030in. contact tips
* 1 lb. spool of 0.030in. self-shielding flux cored wire
* Spool shaft to accommodate 4in. spools
* Amperage output: 30 125 Amps
* Maximum open circuit voltage: 29V
* Wire feed speed range: 0 415 IPM (0 11 MPM); 0 500 IPM (0 13 MPM) at no load
* Built-in contactor makes wire electrically "cold" until trigger is pulled
* Self-reseting thermal overload
* 3-year warranty on drive systems, PC boards, switches and controls
