Machine Parts For Reuse Newsgroup Discussion Forum > Large Size Parts
> Used
> Electrical
> Milaukee
> Mop sink, stainless steel, mat wash up system, hand
Mop sink, stainless steel, mat wash up system, hand
Mop Sink Model: BSM-MS 94-48-DR
Over the years, restaurant owners have been struggling with sanitation issues either on kitchen floor or behind the back door; water spillage on the floor, deterioration of walls in the surrounding area caused by flooding of washed water and sanitizing liquid, and worse of all, accumulation of bacteria, germs, and bad odors throughout the area. A conventional compartment sink will not solve the problem, since with this type of sink working environment is unsafe, slippery and you face the possibility of down-grading from the Health Department. These problems keep increasing each and every time and there are no other solutions out in the market to effectively correct it, besides what we have created it.
The solution that BSM has created is unique A FULLY ENCLOSED MOP SINK. An excellent idea to fit it in between your existing two walls or you can get the optional finished side panels, so you do not have to construct new walls. The stainless steel walls with round edges inside prevents any collection of bacteria, germs and grime. It is large enough that you can hang and wash up to 5 floor mats inside. Even more, it has pin hangers for two floor mops and two utility shelves to store cleaning products. .
* Single continuous piece type 304 stainless steel, durable, easy to clean, sanitary.
( Available: 94 H X 42 W. X 28"D; 94 H X 28 W. X 28"D, CUSTOM SIZE, PLEASE SEND US AN E-MAIL)
* Opening: 80 X up to 44"W X 28"D
* Heavy duty and adjustable rear legs and triangle support plates on two sides.
* Inside edges coved 9/16 radius.
* Five (5) 1/4" pin hangers on bottom shelf.
* Three (3) 1/4" pin hangers on upper shelf.
* Two (2) 1/4" pin hangers on left and two (2) on right side of the panel for mops.
* Standard sink drain hole with 12 clearance between the bottom of the mop sink to the floor for easy relocating the drainage.
* Door at the bottom with handle for plumbing access.
* Stainless steel Front Base Coved included
* Brace channels, 2 on each side, to strengthen the structure.
* Hose hanger Heavy Duty 14 GA
* Optional Faucet Model: BSMAA-840 Heavy Duty PLEASE SEE View seller s other items
Enclosed Mop Sink fulfills your needs with
Sanitation problems caused by:
* Washing and drying floor mats on the floor not allowed by the health department
* Spillage of water on the floor
* Flooding, filtration of water and other liquids used for cleaning which causes humidity and deterioration of walls in the surrounding area.
* Accumulation of bacteria, germs, and bad odors
Totally enclosed stainless steel panel surrounded with big opening for easy access. All round corners. NO more water on the floor and surrounding area.
Tired of standard small mop sinks and having to squeeze in a little working space.
28 Deep by 80 height by 48 width for total of 60 cu. feet working space.
Tired of dropping mops on the floor because you don t know where to store away and drain them
Two (2) shelves 13 apart, which covers 3.2 square feet area.
* Not having the correct area to wash floor mats
* Inventory cleaning materials.
Two (2) rows of pin hangers on the shelves to hang and wash floor -mats, floor-mats hangers on sides and large area for cleaning solutions.
Slippery, unsafe working environment.
Everything related to cleaning will be in place. No more water spots on the floor.
3 S/S Brackets 8 x 11 x 1-5/8 , 16 gauge
FOR RESIDENTIAL OR LOCATION WITHOUT LOADING DOCK
All freight damage must be reported to us within 24 hours. If damage is visible on delivery,
and contact us at ((***) 397 8816)
Or via e-mail at ****@msn.com
Taxes Notes: California state residents are charged applicable sales tax.
There is no sales tax to orders outside the state of California
