Machine Parts For Reuse Newsgroup Discussion Forum > Large Size Parts
> Used
> Electrical
> Milaukee
> Arcair slice torch 03-003-006 f/battery back
Arcair slice torch 03-003-006 f/battery back
YOUR SOURCE FOR WELDING SUPPLIES
WELDING EQUIPMENT - SAFETY SUPPLIES AND MORE
200 Amp Exothermic Torch; Accepts 1/4in (6.4mm) and 3/8in (9.5mm) Slice Cutting Electrodes
Exothermic torches improve crew safety by eliminating the need for hazardous secondary gases (like acetylene) which are typically carried in the crew compartment. Also by reducing the overall time to complete a job, crew exposure to external hazards is minimized.
Police SWAT- Forced entry applications
Removing security bars/doors from hardened houses.
Penetrating steel industrial doors.
Cutting hardened padlocks and chains.
Fast, quiet and easy to use.
Bendable cutting rods used with rod extender allow greater use of cover.
Eliminates risk of collateral damage and liability from explosive entries.
Eliminates "they shot first" scenarios of shotgun breaching.
Highly portable. No hazardous acetylene on site.
Remove security bars, doors, grates from commercial and residential structures.
Heavy rescue, i.e. industrial accidents involving heavy machinery (cranes, farm equipment, process equipment, etc.).
Cut structural steel or concrete reinforcement bar.
Cut track rails, frames, aluminum/stainless skin for Railway / Subway accidents.
Lightweight and highly portable.
No acetylene, compressed air or electricity required.
Operates in all weather conditions, through standing water or through water spray.
Cutting rods reach where conventional torches can't.
Cuts thicker material than portable plasma systems.
Cuts aluminum, stainless steel, hardened steel, cast iron, etc.
Cut, gouge, or pierce through any material
Performs in adverse working conditions and damp environments
Professional's first choice for applications involving specialty gouging, piercing or cutting
The unique burning action of Arcair's Exothermic cutting rods literally liquefies any material in its path using the material itself as fuel. Utilizing only oxygen, Arcair rods quickly cut or melt through almost any known material including cast iron, steel, stainless steel, concrete, granite, nickel, titanium and aluminum, as well as exotic metals.Arcair systems cut so quickly there is minimal heat build-up enabling the temper of the material to remain virtually unchanged.
The Exothermic rods burn in damp atmospheres, even when submerged in mud or water.
When saving time is the primary consideration, Arcair is the professional's first choice for applications involving specialty gouging, piercing or cutting. Equipment maintenance and repair shops perform normally difficult and time consuming tasks in just a fraction of the time required by conventional methods. Downtime of expensive heavy equipment is greatly reduce during track and bucket pin removal, gouging and the removal of hard facing and old welds.
Arcair Exothermic systems operate at temperatures exceeding 10,000 degrees F, eliminating the need for surface preheating.
Repairs are made without raising burrs on bearings and bushings because an electrical current is not required.
Arcair's system does not leave carbon deposits eliminating the need for surface grinding and gouge cleaning.
Arcair's systems are safer than other types of equipment because they do not require high amperage or potentially dangerous acetylene (or any other secondary fuel).
Arcair systems produce less noise, smoke and noxious gases than other systems increasing operator comfort and safety.
Arcair user friendly features have been task engineered for simplicity of operation. The 12v DC ignition system, single oxygen fuel source with one regulator, and completely self-contained portable kits ensure that Arcair's Exothermic systems are easy to operate even for less experienced users.
B & R WELDER REPAIR SERVICE INC.
4412 SOUTHERN BUSINESS PARK DRIVE
Hours : Mon-Fri 8-5 Sat 9-12 EST
Email questions to : ****@radix.net
All products are brand new , not rebuilt ,not reconditioned and carry a full manufactures warranty.
All warranties are thru the manufacturer
Warranty - All warranties are thru the manufacturers. We will help you with calling the manufacturer or receipts.
We are an AUTHORIZED MILLER -HOBART-ONAN-ACE FUME ECTRACTORS -ARCAIR DISTRIBUTOR.
Supplies is family owned and operated. You can speak with a real person at any time for technical
questions or help in the application processes.
B & R requires signature on all machines, as well as packages with a total value exceeding $500. You may
request that your delivery signature requirement be waived by entering a special request in the the form of
an email to ****@radix.net . B & R cannot take responsibility for missing or damaged packages delivered
External damage to all packages must be refused and B & R must be contacted immediately. Internal damage
must be reported to B & R within 5 days of receipt. Damage claims will be refused if the item has been used, is
not in original packaging, or was received more than 5 days earlier.
OVER 150 lbs. will be quoted separately via phone or email. (***)-783-3073 .
B & R Welding Supplies is located at 4412 Southern Business Park Drive , White Plains, Maryland, 20695 .
Fax (***)-934-3057 - Phone (***)-783-3073 - email ****@radix.net & ****@yahoo.com .
