Machine Parts For Reuse Newsgroup Discussion Forum > Large Size Parts
> Non functional
> Mechanical
> Dallas
> Rf 45 mill drill - used only 6 hours + video
Rf 45 mill drill - used only 6 hours + video
Used only 6 hours !! Please check out the video !
For CNC conversions or to add a power draw bar chek out youtube: http:// /results?search_query=rf+45+cnc&aq=f
We bought this mill to cover the 2 weeks until we were supposed to get our knee mill.
Then the knee mill arrived 2 days later and the RF45 has never been used since.
As you can see on the last picture we bought more knee mills and 2 CNC mills. We are developing a small robot and every time we change something we have to machine the same parts again and again, with small changes. The CNC equipment is all we work with, so all none CNC equipment can go.
Please check back we will list a knee mill with DRO used about 20 hours, and a brand new lathe also with DRO.
ATTENTION this is the 220V 3 version for more torque!
Head tilts 90 left - 45 right
6 Spindle speeds: 60-1500 RPM
Spindle to table (max): 18.5"
Working table 9 1/2" x 32 1/4"
I recorded the video to document how we started. Didn't intended to make it public or use it to sell the machine. So it s in German - Sorry. But you can see the machine working.
The aluminum blocks we bought did not have parallel sides so we had to machine them before we could use them on our robot platform. You can see how the fly cutter first cuts and then doesn t touch the surface any more, because the side is at an angle.
All technical specs: http:// /ProductDetails.asp?ProductCode=RF-45-1PH&Show=TechSpecs
For easy tool change you can get a spindle lock at: http:// /gallery.html
Here you can get the power table feed for $279: http:// /catalog/products/products.cfm?categoryID=4198
You can see the mill at 2301 W 5th street, Oxnard, CA 93030.
Mo-Fr 8 to 6, Sa 9 to 5, Su 10 to 3
Please call in advance (805) 300 6031.
A fork lift for loading is available.
