Machine Parts For Reuse Newsgroup Discussion Forum > Large Size Parts
> Non functional
> Mechanical
> Cleveland
> Amana crnr rnd w/ball brg guide 1/2" shnk 2 flute 49514
Amana crnr rnd w/ball brg guide 1/2" shnk 2 flute 49514
The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.
*Not guaranteed due to extreme diameter and radius. For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result.
+Replacement Knife #RCK-268 (2 Required) ++Replacement Knife #RCK-272 (2 Required)
Warning: Maximum RPM 10!= 10,000; 14!= 14,000
Not for Use in a hand-held routerMax RPM
NOTE: USE IN A TABLE MOUNTED ROUTER. NOT FOR USE IN A HAND HELD ROUTER!