Machine Parts For Reuse Newsgroup Discussion Forum > Large Size Parts
> Non functional
> Electronic
> New itron type mv-7 2 wire current transformer :brand :
New itron type mv-7 2 wire current transformer :brand :
Itron Type MV-7 2 Wire Current Transformer ::Brand New::
Cat No: 917251-388, Ratio: 300-5A 2W
The Itron MV-7 2 Wire Current Transformer is used for indoor metering applications on 2-wire low voltage 60Hz circuits (700 V or less).
Standard primary ratings are 75-1200 amperes and secondary
* High-quality, grain-oriented silicon steel cores ensure maximum accuracy
* Secondary terminal arrangement includes compression connectors for ease of installation
* Includes a reliable shorting link with top access and reversible terminal cover for operator safety
* Secure nameplate mounting system uses edge guides and a permanent centre mounting stud
* Polyurethane molded unit in a plastic shell produces a compact transformer with high dielectric and mechanical strength
* Outer shell is injection-molded for a smooth, blemish-free surface
* Convenient installation and dependable operation
* Can often be installed in the same box or cabinet as the meter they are used with
* The height from the base to the primary terminals and the base mounting dimensions are the same for all ratings
* Primary terminals are identical on all units from 75 to 400 amperes, making these units physically interchangeable
* For ease of identification, primary current is indicated in large yellow numbers on the sides of the transformer
* Additional information is supplied on a full data nameplate conveniently located on the top of the transformer
* The mounting feet are slightly flexible to relieve stress caused by uneven mounting surfaces
* Polyurethane construction technique is a tough, flexible material that produces a compact, neat and rugged transformer selected for its high dielectric and mechanical strength, moisture resistance and excellent thermal conductivity
* The outer shell is injection-molded lexan
* High-grade, grain-oriented steel is used in the large cross-section, wound core. By rigidly controlling conditions, these cores are manufactured and heat-treated to produce the best magnetic properties possible
* Primary coil is made from solid copper bar
* Terminals are plated to ensure good contact
* High strength silver brazing connects the terminals to the primary
* The secondary winding is brought out to convenient, easy-to-use secondary terminals molded into the top of the transformer
