Machine Parts For Reuse Newsgroup Discussion Forum > Large Size Parts
> Non functional
> Electrical
> Eagle group 414-16-3-24| 3 comp sink double
Eagle group 414-16-3-24| 3 comp sink double
Eagle Group 414-16-3-24| 3 Comp Sink Double Drainboards
414 Series Deep-Drawn Coved Corner 3-Compartment Sink
14" (356mm) water level is standard.
Heavy gauge stainless steel construction bowls are type 304; drainboards and backsplash are type 430.
Deep-drawn seamless coved corner bowls.
Legs welded adjacent to sink bowls for maximum weight support and stability.
9-1 2" (241mm) standard backsplash includes 1" (25mm) upturn and tile edge for easy installation and feathering to wall/splash surface.
Adjustable non-corrosive bullet feet.
Die-stamped creased drainboards for positive drainage.
All EAGLE sinks bearing the NSF Certification Mark are built in compliance with the National Sanitation Foundation Standard Number 2.
EAGLE is also listed to manufacture custom-built sinks in compliance with the National Sanitation Foundation Standard Number 2.
Sink Bowl Heavy gauge type 304 stainless steel.
Top Drainboards, backsplash and rolled rims are heavy gauge type 430 stainless steel.
Legs 1-5 8" (41mm)-diameter heavy-gauge galvanized tubing with plated 12-gauge gussets and high-impact corrosion resistant fully adjustable bullet feet crossbracing is 1" (25mm)-diameter heavy-gauge galvanized tubing. Optional stainless steel legs utilize 16/304 tubing.
Design and Construction Features:
All bowls have deep-drawn one-piece seamless construction using state-of-the-art hydraulic presses.
Drainboards, when provided, are integrally welded.
All sink bowls have a generous radius with a minimum dimension of 3" (76mm) and are rectangular for maximum capacity.
Leg locations are adjacent to sink bowls, providing increased stability and maximum weight support where needed.
Leg gussets welded to a die-cut heavy-gauge reinforcing plate.
Entire assembly is fuse-welded and planished providing a one-piece seamless sink unit.
Welded areas are high-speed belt blended to match adjacent surfaces with continuity of satin finish.
9-1 2" (241mm)-high full length standard backsplash features 1" (25mm) upturn and tile edge for easy installation and feathering to wall/splash surface.
14" (356mm) water level 17" (432mm) flood level.
Water supply is 1 2" (13mm) IPS for hot and cold lines.
Faucet holes are 1-1 8" (29mm) punched on 8" (203mm) centers; two sets of faucet holes are punched where indicated on schedule.
Faucets are available as options.
Basket-type waste drains included fit sink bowls 3-1 2" (89mm) opening and feature 1-1 2" (38mm) outlet.
# Drainboards: (1) 24" RIGHT-Hand Drainboard
Overall Size: 26"W x 102"L x 44-1/2"H
Sink, Three Compartment, 16/304 s/s 19" front-to-back x 16"w x 14"D drawn bowls, 10" 16/430 s/s backsplash & 24" double drainboards, galv open frame base w/ side crossrails, NSF
Eagle Group Pre-Rinse Spray Unit Splash Mount |300719
Pre-Rinse Spray Unit, splash mount (EAG-300719)
Eagle Group Pre-Rinse Wall Bracket |301190
Pre-Rinse Wall Bracket (EAG-301190)
Eagle Group 301189| Stainless Steel/Plastic Pre-Rinse Faucet
Pre-Rinse Faucet, add-on 12" spout, to be used w/300719 (EAG-301189)
Eagle Group T&S Pre-Rinse Spray |313296
T&S Pre-Rinse Spray, splash mount 8" centers, w/wall bracket, extra heavy-duty (EAG-313296)
Eagle Group T&S Add-A-Faucet |313297
T&S Add-A-Faucet, 12" spout, use w/313296 pre-rinse spray unit (EAG-313297)
Eagle Group E101A| Turn Down Back of Splash Z Clip
Turn down back of splash per table with Z clip (EAG-E101A)
