Machine Parts For Reuse Newsgroup Discussion Forum > Large Size Parts
> New
> Mechanical
> San Jose
> Dynapar brand tachometer A103-003 danaher controls
Dynapar brand tachometer A103-003 danaher controls
Dynapar Brand Tachometer A103-003 Danaher Controls
14 days to test your merchandise, not happy, send it back!!!! for full refund!!
Condition: Not new, but in good condition.
High Speed Count Input: PNP or square wave pulse; 10 kHz max (50% duty cycle),
45 sec min pulse width; Low State: < 1.0 VDC,
High State: > 2.0 VDC (28VDC max)
Low Speed Count Input: NPN, Contact Closure; 30 Hz max (50% duty cycle), 12 ms
min pulse width; Low State: < 1.0 VDC,
Calibration: (Models A103-001 & A103-002) Programmable input scale multiplier.
Security Input: Allows access to panel reset and programming features
Reset Action: Reset to zero by panel button or remote input. Models A103-001 &
A103-002: Programmabble for reset to a value of -999999 to 999999
Remote Reset Input: NPN or Contact Closure to common; edge sensitive
Power Source: Single or dual 3V Lithium battery; typical 5 years life w/single battery,
10 years w/dual batteries. Field-replaceable batteries
Display: 12mm high, Supertwist LCD; 8 digits; "Low Bat" indicator. A103-001 and
A103-002 have polarity sign to indicate counting below zero
Backlighting: Green Illumination over whole viewable area. Requires 10 to 28 VDC