Machine Parts For Reuse Newsgroup Discussion Forum > Large Size Parts
> New
> Electrical
> New strait-line laser level X3 construction building
New strait-line laser level X3 construction building
This is a NEW still in the package never opened Strait-Line Laser Level X3 model which works with AA size batteries. What's included with your Strait-Line X3
* Four 3M Command adhesive strips
* Tilting Laser arm provides exceptional line intensity visibility control up to 60 feet.
* Pivoting laser head allows you to manually level the laser line on adjacent wall.
* Angle index ring allows you to create angled layouts by controlling the laser line through 360 degrees.
* Micro-adjust control moves the tool up/down or side-to-side for perfect positional alignment.
* Three easy to read bubble vials (plumb, level, and wrap-around for projection on a second surface) allow precise leveling for vertical, horizontal, and 2-wall line layouts.
* 3M Command adhesive strips mount the tool to a clean, dry surface. Remove the tool easily with no damage to the mounting surface.
* (Optional) On appropriate surfaces, 2 pushpins (not included) can be used to mount the tool, in place of the 3M command adhesive strip.
* Two battery cartridges hold 1 AA alkaline battery per cartridge.
* Recommended Usage the Strait-Line X3 is recommended for indoor use, or indirect sunlight.
* The Strait-Line X3 operates using 2 AA alkaline batteries (not included)
* NOTE alkaline batteries are recommended.
* Length of laser line (primary surface) 0 degrees tilt 20 feet (6m)
* Length of laser line (adjacent surface) 0 degrees tilt at 20 feet; 10 feet (3m)
* Laser diode type red 635 nm
* Power Supply 2 type AA 1.5 volt batteries (not included)
* Battery Life App. 15 hours continuous use with alkaline batteries
* Weight: 8.9 oz / 23g (excluding battery)
* Operating temperature 32 degrees F to 104 degrees F (0 degrees C to 40 degrees C)
