Machine Parts For Reuse Newsgroup Discussion Forum > Large Size Parts
> New
> 1PCS high-power 100W white led high-brightness 6500LM
1PCS high-power 100W white led high-brightness 6500LM
1pcs high-power 100w white led high-brightness 6500LM
Long service life(Intensity remain above 70% after work 100000H)
Each color for your selection (red , yellow , green , blue , white , warmed white)
High efficient (better than incandescent lamp and halogen lamp)
Adjust its light at your option
Many appearances for your selectionMany appearances for your selection
DC Forward Voltage (VF): 33.0 ~ 36.0 Vdc
Color Temperature: 6000K-6500K
* Lambertian Package Outlines:
1 All dimensions are in millimeters (inches).
2 Tolerance is 0.25mm(.010") unless otherwise noted.
3 Specifications are subject to change without notice.
* Absolute Maximum Ratings at Ta=25deg:
Electrical/Optical Characteristics at Ta=25deg :
* Electrical & Optical Curves at Ta=25deg:
1 Heat generation must be taken into design consideration , LED heat sink and others remain good contact , enlarge heat loss condition which can be ensured LED long service life and luminous efficient.
2 Use IPA as a solvent for cleaning LED products, the other solvent may dissolve the LED package and the epoxy, Ultrasonic cleaning should not be done.
n Open circuit , short circuit , leak current overpass , turn on voltage becomes lower , Inadequate intensity supplied.
n Enough large heat sink can give out a lot of heat .
Our 20w leds need cooling board to avoid the extra heat. Pls use the 20w led as the product specifications . If improper operation caused led burning out , we won't be responsible for it .
